The function and inner working of photodetectors
When a photon is absorbed by a material, it typically creates a free electron hole pair. How can this principle be used to measure photons absorbed by a photodiode?
Typical photodetectors function by creating free electron hole pairs within the material. This means moving electrons up to the conduction band, while creating a hole in the valence band. A typical way to detect these charges is by the use of doped semiconductor devices.
Photodiodes
A typical photodiode is a junction. The plus sign + means that the acceptor concentration at the p-side of the junction is higher then the doner concentration on the n-side. The photodiode is constructed by having a small windows with antireflection coating cover the p-side of the function. The photodiode is normally reverse biased, meaning that the p-side is connected to the negative side of an external power side, and the n-side is connected to a positive side. This extends the depletion region within the material. The total voltage drop over the depletion region will then be the sum of the built in barrier potential and the reverse bias . The reverse bias increases the strength of the internal electric field leading to higher operation speeds.
When a photon with energy equal or greater than the bandgap hits the diode, it generates a free electron hole pair. This is called photogeneration. Most often this happends in the depletion layer where the electric field within the layer splits appart the free electron and positive hole. These free charge carriers creates a current known as a photocurrent within an external circuit. By integrating this quantity over time and dividing by the fundemental charge we can get the total amount of charge carriers created. By dividing this number by 2, we can obtain the number of photons absorbed by the photodiode. This is necessary as each photon creates a positive hole in addition to a free electron per photon.